久章草国语自产拍在线观看
                      公司簡介 Sika材料匯總 灌漿料 環氧地坪 聚氨酯地坪 耐磨地坪 耐磨罩面漆 密封膠 工程加固 聯系我們

                      Sikaflex-HP 1

                      1 component elastic polyurethane based sealant.

                      Product description: Sikaflex-HP 1 is an elastic joint sealant based on polyurethane. Sikaflex-HP 1 is a 1-component, ready for use product and reacts with moisture to a elastic sealant.

                      Fields of application: · Joints in Building Construction,

                      - e.g. Balcony Parapets, .

                        • on concrete
                        • on aerated concrete
                      • connection joints in building construction

                      - around windows and doors

                      - facade and metal claddings and concrete elements

                      • sealing of joints of wooden and metal structures

                      Do not use Sikaflex-HP 1 as glass sealer, in floor joints, glass sealing and in joints with permanent water immersion. Before using on natural stone ask your sales manager.

                      Advantages:

                      • excellent adhesion to many substrates
                      • bubble free curing
                      • very good workability
                      • movement capability 20%

                      Packaging: 310 ml cartridges, 12 cartridges per box

                      600 ml sausages, 20 sausages per box

                      Colour : concrete grey, white

                      Colour deviations may occur due to chemicals, high temperature, UV-radiation (especially with colour shade white). A change in colour do not influence the technical and protective quality of the product.

                      Shelf life: In original containers, in cool and dry environment at temperatures between +10°C and +25°C: 12 months.

                      Technical data:

                      Characteristic values

                       

                      Remarks

                       

                      Chemical base:

                      1-component polyurethane

                       
                       

                      Specific gravity:

                      approx. 1,25 g/ml

                      DIN 53 479 B

                       

                      Sag resistance:

                      excellent

                      DIN EN 27 390-U 20

                       

                      Curing speed:

                      2mm /24 hours

                      normal atmosphere DIN 50 014-23/50-2

                       

                      Skinning time

                      ca. 60-120 minutes

                      normal atmosphere DIN 50 014-23/50-2

                       

                      Application temperature:

                      +5°C to +40°C

                      Substrate temperature

                       

                      Service temperature:

                      -30°C to +70°C

                       
                       

                      Movement capability:

                      20 %

                      of average joint width

                       

                      Shore-Hardness A:

                      approx. 25

                      as per DIN 53 505

                      Testing condition: 23°C / 50% relative humidity

                      Preparation

                      and planning: Joints must be properly dimensioned as changes are normally no longer feasible after construction. Basis for calculation of the necessary joint width are the technical characteristic values of the joint sealer and the adjacent building materials, the exposure of the building elements, their construction and size.

                      Condition of

                      substrate: Clean and dry, free from dust and loose particles or surface treatments. Paint, laitance and other purely adhering particles must be removed by grinding. Clean joints with compressed air.

                      Primer: Sika Primer 3 for porous substrates, e.g. concrete, aerated concrete and cement plaster.

                      Flash off time : minimum 30 minutes, maximum 8 hours.

                      Sika Cleaner 1 for powder coatings EP and PU coatings

                      Flash off time: 15 minutes.

                      Sika Primer 21 for PVC and for mortar in connection joints between PVC and building.

                      Flash off time : minimum 30 minutes, maximum 8 hours.

                      Sika Primer 35 for metals e.g. Aluminium, Noble Steel, galvanised steel,

                      Flash off time : minimum 30 minutes, maximum 8 hours.

                      Primers are only adhesion promoters. They are not substitutes for cleaning the surfaces nor can they improve their strength significantly

                      For further information see our Sikaflex Primer table

                      Backfilling: Use only close cell, sealant compatible foam backer rods e.g. high-resilience polyethylene foam rod.

                      Calculation of

                      material consumption: The following table gives an indication of running metres of joint one may seal with one 600 ml sausage:

                      Joint

                      depth

                      running metres of joint per 600 ml unit width

                      of joint b (mm)

                      d (mm)

                      8

                      10

                      12

                      15

                      20

                      25

                      30

                      35

                      8

                      9,3

                      7,5

                      6,2

                      5,0

                      10

                      7,4

                      6,0

                      5,0

                      4,0

                      3,0

                      12

                      4,0

                      3,3

                      2,5

                      2,0

                      1,8

                      1,30

                      15

                      2,0

                      1,6

                      1,3

                      1,00

                      20

                      0,8

                      The stated values are indications only.

                      Remarks: Elastic sealants should not be overpainted in general!

                      Sealant compatible coatings may cover the joint sides to max. 1 mm. The compatibility must be tested individually according to DIN 52 452-2.

                      Precautionary

                      measures: Keep containers tightly closed in dry environment. Observe regulations on label.

                      Consult and follow guidelines on the Material Safety Data Sheet

                      內頁鏈接: 西卡 sika 聚氨酯砂漿 聚氨酯地坪 環氧灌漿 水泥基灌漿 西卡灌漿 西卡膠

                      友情鏈接: 醫療車 貨車車廂     新聞中心: 行業新聞